Logo
en de

Press Information

2018

Fresh wind in the areas of video surveillance, lighting and installa-tion material

27.09.2018

At WindEnergy, the international wind energy trade fair in Hamburg, the supplier for industry, trade and shipbuilding WISKA® presents its new products in the fields of CCTV video surveillance, lighting and cable entry.

The video surveillance range has been extended: WISKA® showcases a new Plastic PTZ IP Dome Camera D100 (pic. 1) for offshore applications at WindEnergy. Also, the camera range has been extended with explosion-proof and nightvision products. This also helps to increase safety and security.

When it comes to lighting, the LED Floodlight 5000 is undoubtedly one of their major highlights (pic. 2). It is ideally suited for applications under extreme weather conditions, as it is heat- conductive and corrosion-free due to its special modular design of high-quality plastic modules and stainless steel housing. To meet different lighting requirements, the floodlights is now also available with “narrow” and “wide beam” lens types.

At the WindEnergy WISKA® is solidifying its position as a full-range supplier in the field of cable entries and presents the cable protection system Brace® (pic. 3). The heart of the system is the BraceFITTING. The fastening section of the BraceFITTING is designed in such a way that it directly grips into the conduit and can be opened and closed again using a standard tool in just a few seconds. Part of the system are also non-metallic conduits and the metallic range of fittings and conduits. The range is rounded off by braided and woven sleeves for comprehensive protection.

The innovative cable entry system CONMAXX (pic. 4) consists of three components: Frame, grid inserts and conical sealing elements. The three components can be compiled individually according to requirement and application. This way, the entry system can be assembled from the inside out. Together with the WISKA® typical junction boxes, they cover the majority of electrical installation on board and are also presented at SMM.

WISKA® at WindEnergy 2018: Hall B6, Stand 208a

PM_WISKA_WindEnergy .docx PM_WISKA_WindEnergy .pdf PR_WISKA_WindEnergy .docx PR_WISKA_WindEnergy .pdf less

Highlights at their “Heimspiel”: WISKA® presents product novelties at SMM

04.09.2018

Hamburg, 4 September – At SMM, the world´s leading trade fair for the maritime industry, in Hamburg, the supplier for trade, industries and shipbuilding presents product novelties in the fields of reefer container sockets, CCTV video surveillance, lighting and cable entries.

Driven by their ideas and exhibits of product intelligence for lighting and reefer sockets, WISKA® also wants to discuss possible applications of these in maritime surroundings.

“As a company founded in Hamburg, we have been exhibiting at SMM for decades – and each time are more than happy to do so. We like to see partners, showcase new products and keep in touch about future and current maritime subjects. Exhibiting here at SMM in Hamburg, always feels like a `Heimspiel´ for us, which is the German word for “home game”.”, says WISKA® General Manager Ronald Hoppmann. And at this year´s SMM, the company presents several new product highlights.

The VARITAIN® reefer container socket range is famous for meeting most individual demands on board. And now it has been extended by two new spacesavers. The new VARITAIN® PushIn Rack (pic. 1) has been designed in upright position to offer a maximum of reefer connections on the same space. The sockets are designed with a 45° angle to ensure a space-saving product and safe installation. The Advance version (pic. 2) of the PushIn Rack further has an external power connection and the smallest housing of the VARITAIN® series.

„The external powerport significantly simplifies installation as the main power supply is very comfortable to connect. The risk of damages is minimised, because the housing´s lid can stay closed during the whole installation process.“, Ronald Hoppmann explains.

Also the video surveillance range has been extended: WISKA® showcases a new Plastic PTZ IP Dome Camera D100 (pic. 3) for maritime applications at SMM. Also, the camera range has been extended with explosion-proof and nightvision products. This also helps to increase safety and security on board.

When it comes to lighting, the LED Floodlight 5000 is undoubtedly one of their major highlights (pic. 4). It is ideally suited for applications under extreme weather conditions at sea, as it is heat- conductive and corrosion-free due to its special modular design of high-quality plastic modules and stainless steel housing. To meet different lighting requirements, the floodlights is now also available with “narrow” and “wide beam” lens types.

The cable entries range of WISKA® newly also comprises a comprehensive cable protection range with metallic and non-metallic fittings and conduits. Together with the WISKA® typical junction boxes, they cover the majority of electrical installation on board and are also presented at SMM.

WISKA-SMM-PM.pdf WISKA-SMM-PR.pdf WISKA-SMM-PM.docx WISKA-SMM-PR.docx less

Goals, team spirit, football fever: WISKA kicks off its first Business Cup

04.07.2018

Football connects, as the supplier for the electrical trade, industry and shipbuilding, WISKA from Kaltenkirchen, found when it invited customers and partners to attend the first WISKA Business Cup. A total of eight companies from the electrical trades and wholesalers as well as international sales partners from England, Ireland and the Netherlands kicked a ball around in style in front of the Volksparkstadion in Hamburg to win their very own trophy. Teams applied in advance to take part via the WISKA lottery.

‘Achieving good figures with customers and partners is important, but it is even more important to know each other well. This not only makes our work more successful, but also simply makes it more fun to spend time together’, says WISKA Managing Director Ronald Hoppmann, who is the third generation of the family to manage the company together with his sister Tanja Hoppmann.

The joy of playing and the fun that was had also inspired former HSV professional, current DFB sports director and coach of the women's national team Horst Hrubesch. The former international came as a surprise guest and was enthusiastic about the mood of everyone involved.

It was also Hrubesch who presented the Cup to the winners of the tournament, the team from electrical wholesaler Hillmann & Ploog. Second and third places went to the two teams from WISKA Germany. The top scorer of the day was Callum Wilson from Team WISKA UK.

Even after the award ceremony, the atmosphere remained relaxed. ‘We do it like the pros. On the pitch, we’re united by our enthusiasm for sporting competition and off the pitch, we're inspired by working together’, summarises Hoppmann, adding: ‘We're delighted that many young players have also taken part in the guest teams – because the promotion of young talent is particularly important to us as a family company. Not only at WISKA itself, but also in our home region at Hamburger SV, which enabled us to host this event at the stadium.

And because football fever works up an appetite, the teams went on to a Hamburg beach club after the tournament, where the eventful day ended with a relaxed barbecue by the Elbe. The following day, all the guests got the opportunity to get to know WISKA on site in Kaltenkirchen – from development and production to the laboratory. The new edition of the popular “WISKA box” presented this March, one of the latest WISKA highlights, was essential viewing, not least as a result of the direct cooperation with craftspeople who were hugely enthusiastic and already flirting with the idea of registering early for the next WISKA Business Cup.

PM_WISKA_Business_Cup.pdf PM_WISKA_Business_Cup.docx WISKA_Business_Cup.zip Press Release_WISKA_Business_Cup.pdf Press Release_WISKA_Business_Cup.docx less

Outside the box thinking: The new junction boxes by WISKA

15.03.2018

Trade and industry supplier WISKA presents its new highlights in installa-tion material at this year´s Light + Building in Frankfurt.

This year WISKA have focused on their newly developed junction box range. WISKA has added two new sizes to its popular COMBI series and the WISKA installation box has receieved a total make-over.

„The new COMBI boxes come with the proven quality of the series, that is characterised by its UV- and ozone resistance“, explains Stefan Stange-Düsterhöft, electrical wholesale and trade sales manager at WISKA.

Just push the cable through the soft membrane and it is automatically sealed with IP66 protection – that is how easy the installation with the new COMBI 116 is. Twice the size as the already established COMBI 108 it offers greater installation space and flexibility.

The new COMBI 206 measures 85x49 centimeters and has a space-saving rectangular form. This makes it perfect for outside applications and LED luminaires. Six threaded membrane entries help create maxi-mum flexibility.

When developing the new installation boxes WISKA has taken into consideration the everyday needs of electricians at work. The new WISKA installation boxes offer comprehensive fixing options: whether with cable ties, screws and dowels or with various fixing elements. Furthermore the lid can be fitted tightly without use of a tool or screws.

“The new installation boxes is a continued development of the popular KA series which WISKA initially developed over 80 years ago. For the relaunch we have spoken with electricians about what is important for them. The results have been considered in the development.”, says Stefan Stange-Düsterhöft.

WISKA_Abzweigkasten_Light_und_Building_2018.pdf WISKA_Abzweigkasten_Light_und_Building_2018.docx WISKA_Junction_Boxes_Light_und_Building_2018.pdf WISKA_Junction_Boxes_Light_und_Building_2018.docx less

2017

Master-piece out of plastic: German industrial supplier launches new cable protection system

18.10.2017

Industry, trade and shipbuilding supplier WISKA is expanding its product range to solidify its position as a full-range supplier in the field of cable entries with a new development in cable protection: a fitting for non-metallic conduits called BraceFITTING.

"By now, users had to make sure that the correct fittings were used in accordance with the applicable protection requirements. Our new system, however, has been designed for IP68 from the go. Thereby the product always offers the highest protection standard for every conceivable application, while this also helps with storage as only one single fully assembled component has to be kept in stock", explained Lars Wiemann-Laasner, Business Development Manager Industry at WISKA.

In addition to providing comprehensive protection, the product allows significant time savings during assembly and maintenance. The fastening section of the BraceFITTING is designed in such a way that it directly grips into the conduit and can be opened and closed again using a standard tool in just a few seconds. The sealing ring is connected directly to the product by two component injection moulding. This ensures perfect sealing properties and guarantees that the ring cannot be lost during assembly.

The idea of supplementing the existing product portfolio of cable glands and a cable entry system with cable protection was clear and obvious to Lars Wiemann-Laasner. "We strive to provide our customers with comprehensive solutions in the field of cable protection. As a supplier with many years of experience in plastics processing, it was merely the next logical step to have this knowledge influence the development of the new product."

In addition to the BraceFITTING, the company based near Hamburg also supplies the corresponding non-metallic conduits and the metallic range of fittings and conduits. The range is rounded off by braided and woven sleeves for comprehensive protection.

HERE you can find further information about our Brace® cable protection system and technical details. 

WISKA is showcasing its new cable protection range Brace® live at SPS IPC Drives exhibition in Nuremberg, 28 to 30 November, hall 5, stand 445.

WISKA_PM_Kabelschutz.docx WISKA_PM_Kabelschutz.pdf WISKA-PR-CableProtection.docx WISKA-PR-CableProtection.pdf BRACE.zip less

Hamburg industrial company WISKA becomes official sponsor of HSV young talents

22.09.2017

The Hamburger SV (HSV) can once again look forward to a sponsorship from WISKA during the season 2017/18. The company is a supplier to diverse industries, trade and shipbuilding and has extended its partnership as sponsor of the long-established German Bundesliga football team. Furthermore, WISKA is also one of the first companies to get involved in HSV’s newly formed association for young talents. 

‘The fact that WISKA is continuing to sponsor the HSV demonstrates great trust in the partnership. As a sponsor of our junior teams, our partner is now also getting involved in the vocational and advanced training of our young football players. There isn’t enough praise that can be said for this commitment,” said HSV CEO Heribert Bruchhagen, commending the further collaboration.

‘With its newly built campus, the HSV has established an intensive training centre in which young talents have the opportunity to launch their careers in professional sports. As a family-run company, we know how important this support is. Young people need an opportunity to prove themselves. This is a very good way to build a bridge into the future. That’s why we expanded our partnership to include sponsoring young talents,’ said WISKA general manager Ronald Hoppmann, who leads the company in its third generation together with his sister Tanja Hoppmann.

The head of the youth training centre, Dr. Dieter Gudel, is also pleased about the new sponsor’s involvement: ‘We are very happy to have gotten WISKA on board as a dedicated partner for our youth training centre. We believe that people should always have more than one option – a leg to stand on and a leg to kick with. It’s important to give our young players deep insights into another working environment. In this regard, WISKA is an important sponsor.’

Supporting young people has always been extremely important to WISKA – which is demonstrated by the company’s vocational trainee to employee ratio of 10 %. In addition to providing young people with comprehensive vocational training, a focus is also on self-responsibility. From internal projects to representing the company at established trade fairs – at WISKA, vocational trainees learn what it means to play an active role in shaping the company and to assume responsibility.

‘People still learn best from their own experiences,’ said Ronald Hoppmann, and added: ‘Our experience is that vocational trainees are particularly happy here. After all, over 15 % of our employees are former trainees.’

PM-HSV_WISKA_Nachwuchs.docx PR-HSV_WISKA_youngsters.docx PM-HSV_WISKA_Nachwuchs.pdf PR-HSV_WISKA_youngsters.pdf HSV.zip less

Twin-shot competence by WISKA: Cable glands rethought and grommets with strain relief for multiple cables

12.04.2017

On the Hannover Messe two novelties are awaiting the visitors on the WISKA fair stand. Both benefit from the long standing expertise in twin-shot moulding.

The cable gland MARATHON convinces with its new design and elevated strain relief according to category B (EN 62444). This has been realized by separating the sealing from the strain relief function.

The new MultiCLIXX combines the advantages of existing grommets by WISKA: Customers can insert up to four cables via the soft membrane component at a minimum of time. Strain relief is accomplished by the intelligent grommet construction.

With the introduction of the Brace cable protection system and the cable entry system CONMAXX in the last year WISKA now offers its customers all cable entry solutions from its own production, including the proven cable gland range.

Besides the product news the focus on the fair is getting to know customers and partners better and deepening the business relation. “A good relationship is based on knowing each other. For good business relations this is extremely important as well as a trust basis”, says Ronald Hoppmann, General Manager of WISKA.

This keynote is also reflected in the communication of WISKA and the fair stand which focuses on relationships. Coffee house elements such as furnishings, a coffee bar and a bench invite to linger and have good talks to get to know each other. 

 „We are convinced that good business works like that. Fist get to know each other and then talk about our customer´s needs and ours products. “, adds Hoppmann.

The fair stand of WISKA on the Hannover Messe can be found in Hall 13, Stand C76.

PM_WISKA_HMI_2017.docx PM_WISKA_HMI_2017.pdf MARATHON.zip less

2016

WISKA presents cable entry highlights of 2016 at SPS IPC Drives in Nuremberg

25.10.2016

WISKA, the expert for cable glands, has been expanding its product range of cable entry solutions in 2016. In addition to the tried and tested cable glands in polyamide, brass and stainless steel WISKA now offers two entirely new product lines: the cable protection system Brace and the modular cable entry system CONMAXX. Furthermore the supplier for industry and shipbuilding from Kaltenkirchen has introduced the ShotGLAND series, a gland for extreme temperature environment as well as new venting pressure equalization elements.

At the SPS, Europe’s leading exhibition for electric automation, WISKA presents all these product highlights and its extended range in cable entry to the professional public.

The Brace system is brand new. Heart of the new product line is the BraceGLAND, an innovative non-metallic fitting, developed and produced in-house at WISKA´s headquarters in Kaltenkirchen, North of Hamburg. Thanks to its 360° clasp mechanism, this product is safe to install and has a high integrated strain relief for reliable protection, e.g. against heavy vibration. Furthermore the large sealing area means that no special cutting tool for the conduit is needed. At the same time the high IP protection class reliably ensures that no dust and water can enter. Alongside the innovative non-metallic fitting, WISKA offers an extensive cable protection portfolio of premium non-metallic conduits, as well as sleeves. The development of the WISKA cable protection system was rated as especially innovative by the federal state of Schleswig Holstein and is therefore financially supported with means of the ERDF.

With CONMAXX, WISKA presents a modular cable entry system especially well adapted for cabinet applications and electrical housings at InnoTrans. CONMAXX consists of three components: Frame, grid inserts and conical sealing elements. The three components can be compiled individually according to requirement and application. This way, the entry system can be assembled from the inside out. Therefore even subsequent, individual changes to the wiring are no problem due to the optional split sealing elements and the closed frame. With 100 different seals, four frame sizes and four grid inserts, CONMAXX enables an extremely flexible and individual electrical installation.

The ShotGLAND cable gland series from WISKA is one of the flattest cable glands on the market. With silicone sealing, the LT version of the ShotGLAND can be used in temperatures ranging from -60 °C to 180 °C.

SPS IPC Drives will take place from 22 to 24 November 2016. WISKA is located in Hall 5, Stand 445.

PM_WISKA_SPS_IPC_Drives_2016.docx PR_WISKA_SPS_IPC_Drives_2016 EN.docx PM_WISKA_SPS_IPC_Drives_2016.pdf PR_WISKA_SPS_IPC_Drives_2016_ EN.pdf WISKA-Bilder-SPS-2016.zip less

WISKA presents a new product line for cable protection at InnoTrans in Berlin

15.09.2016

WISKA, the expert for cable glands, is adding cable protection to its range. At the leading international trade fair for transport technology, InnoTrans, the company from Northern Germany presents the new Brace system to the professional public.

Heart of the new product line is the BraceGLAND, an innovative non-metallic fitting, developed and produced in-house at WISKA´s headquarters in Kaltenkirchen, North of Hamburg. Thanks to its 360° clasp mechanism, this product is safe to install and has a high integrated strain relief for reliable protection, e.g. against heavy vibration. Furthermore the large sealing area means that no special cutting tool for the conduit is needed. At the same time the high IP protection class reliably ensures that no dust and water can enter. Alongside the innovative non-metallic fitting, WISKA offers an extensive cable protection portfolio of premium non-metallic conduits, as well as sleeves. The development of the WISKA cable protection system was rated as especially innovative by the federal state of Schleswig Holstein and is therefore financially supported with means of the ERDF.

With CONMAXX, WISKA presents a modular cable entry system especially well adapted for cabinet applications and electrical housings at InnoTrans. CONMAXX consists of three components: Frame, grid inserts and conical sealing elements. The three components can be compiled individually according to requirement and application. This way, the entry system can be assembled from the inside out. Therefore even subsequent, individual changes to the wiring are no problem due to the optional split sealing elements and the closed frame. With 100 different seals, four frame sizes and four grid inserts, CONMAXX enables an extremely flexible and individual electrical installation.

Furthermore WISKA presents cable glands of its Railway series made of brass, polyamide and stainless steel which comply with the unified European fire safety standard EN 45545 and meet the highest requirements of Hazard Level 3. An ideal addition to the railway series is the ShotGLAND cable gland series from WISKA, one of the flattest cable glands on the market. With silicone sealing, the LT version of the ShotGLAND can be used in temperatures ranging from -60 °C to 180 °C.

InnoTrans will take place from 20 to 23 September 2016. WISKA is located in Hall 12, Stand 311.

PM_WISKA_Innotrans_2016.docx PM_WISKA_Innotrans_2016.pdf PR_WISKA_Innotrans_2016.docx PR_WISKA_Innotrans_2016.pdf WISKA-Bilder-Innotrans-2016.zip less

New signing meets new products: HSV new signing Alen Halilović on the WISKA stand at SMM

07.09.2016

“He made a great impression on me when I watched his first match against Zwickau”, said WISKA managing director Ronald Hoppmann, himself a big HSV fan. “What I noticed about Halilović is that the man enjoys his job. That’s a character trait which will help you go far in life,” added Hoppmann.

The 20-year old Halilović sees it the same way. On the question of how important it was for him as a professional sportsman to enjoy his job, he replied: “It is very important. If you do not enjoy it, you do not improve.”

As official supplier to Hamburger SV, WISKA took the initiative to provide a surprise for visitors to the stand and invited the HSV player. And it went down well! Many visitors used the opportunity to get an autograph from the HSV pro at the WISKA stand.

Along with its HSV news, WISKA presented its in-house innovations for hazardous areas, camera surveillance, LED and reefer container socket on the trade fair.

PM_WISKA_AG-Stunde_SMM_2016.docx PM_WISKA_AG-Stunde_SMM_2016.pdf PR_WISKA_AG-session_SMM_2016.docx PR_WISKA_AG-session_SMM_2016.pdf WISKA-Bilder-Autogrammstunde.zip less

WISKA lights up a Hamburg landmark

06.09.2016

Using high-power searchlights, WISKA shines the spotlight on the Hamburg Television Tower at SMM, the leading international marine trade fair.

At SMM in Hamburg, WISKA was not only exhibiting in the trade fair halls, but was also carrying out a very special project together with Hamburg Messe und Congress GmbH (HMC): Four stainless-steel halogen metal vapour searchlights, normally used in container shipping, have been mounted on a ten-foot container in front of the main entrance of the fairgrounds. To mark the occasion of the SMM, they illuminated the Hamburg Television Tower and the trade fair entrance throughout the trade fair from 6 – 9 September. Along with St. Michael’s Church, the TV tower is one of the most prominent landmarks in the Hanseatic city. “The idea came about last winter at one of the many international trade fairs at which WISKA also exhibited its own searchlights on a joint stand with us”, recalls Claus Ulrich Selbach, business unit director at HMC. “We are very pleased that our idea has now become reality.” Ronald Hoppmann, WISKA managing director added: “Normally our searchlights sail the seven seas, but to light up the Hamburg Television Tower – that’s both an honour and something that is very close to our hearts.”

The Heinrich Hertz Tower, which was opened in 1968 and is located next to the Hamburg trade fair centre, was for decades one of the biggest attractions of the city. Its observation platform and panoramic restaurant offered a spectacular view over the Alster and Elbe. Since 2001, however, the tower has been mothballed and can no longer be entered. Despite this, the love of the people of Hamburg for their TV tower has not diminished with the closure of the platform.

The Kaltenkirchen-based company WISKA also showed its affection for the Heinrich Hertz Tower with the lighting installation at SMM 2016. With its searchlights, the company ensured that one of the most important Hamburg landmarks once again shone for four days in all its former glory.

PM_WISKA_Hamburger-Fernsehturm.docx PM_WISKA_Hamburger-Fernsehturm.pdf PR_WISKA_TV_TOWER.docx PR_WISKA_TV_TOWER.pdf PM_WISKA_Hamburger-Fernsehturm.zip less

WISKA presents Innovations in Ex Products, Camera Surveillance, LED and Reefer Container Sockets

06.09.2016

At SMM this year, WISKA is presenting a new energy-efficient luminaire for hazardous areas to the expert audience: The Ex LED Luminaire 4200 is based on the LED multi-purpose luminaire 4000 by WISKA, which has proven its quality in thousands of operating hours worldwide. It is maintenance-free, easy to mount and install as well as cost-efficient, making it the ideal choice for applications in hazardous areas on vessels and for the offshore industry.

A brand-new floodlight series by WISKA also uses LED lamps and is being introduced to the public for the first time. The modular and cost-efficient in-house development comes with no aluminium at all and is able to cope with even the hardest environmental conditions. Each LED module consists of special heat conducting plastic, its overall protective casing is made of stainless steel. The single modules are working independently. The LED floodlight 5000 will be available with one to four modules with options of tilting and dimming. Standard halogen floodlights can be replaced by the new LED 5000.

Within one of its core businesses, the reefer container sockets, WISKA is also presenting a another innovation of its VARITAIN® range: VARITAIN® PushIn Advance. The new reefer container socket revolutionises the ship´s power connection to the socket itself by relocating its cable connection with terminal block and cable protection into the cable gland area out of the casing. The WISKA developed power port therefore allows for a significantly smaller casing and protection for all internal components as for initial setup by the shipyard, opening of the casing´s lid now is a thing of the past. The shipyard´s installation will thus be considerably faster and easier – a gain of time for the yard and high operation reliability for the owner.

Last but not least, also in its range of computer-controlled CCTV systems, WISKA showcases a new product for hazardous areas with its Ex Dome Camera. Its integrated connector unit does not need external cabling anymore. With the new camera, WISKA is successfully extending its product range of CCTV-systems.

 

WISKA at SMM 2016: Hall B6, Stand 202

PM_WISKA_SMM_2016-de.docx PM_WISKA_SMM_2016-de.pdf PM_WISKA_SMM_2016-en.docx PM_WISKA_SMM_2016-en.pdf Pressebilder-WISKA-SMM-2016.zip less

The industrial company WISKA is official supplier to HSV

25.08.2016

WISKA, supplier for industry, trade and shipbuilding, is now a new supplier to the Hamburg Sport Club (HSV).

Alongside emotional support, the famous Bundesliga club can also look forward to sponsorship from Kaltenkirchen for the 2016/17 season. “We are delighted to be supporting HSV as an official supplier. We have a lot of soccer fans among the workforce and close ties with Hamburg, the city where it all began for us. It just feels right,” said WISKA managing director Ronald Hoppmann, who represents the third generation of management in the family-owned company with his sister, Tanja Hoppmann.

How did the company come to support HSV in this way? “It came about like this,” as Hoppmann then explains: “We were sitting in Hamburg together with colleagues from our English subsidiaries.” The main topic of conversation for the evening was the legendary Wembley goal.

“Our German colleagues were obviously convinced that is was not a goal,” recalls Hoppmann. “Our colleagues from WISKA UK thought differently, but that is how it is when you are discussing the most legendary goal in footballing history. We could have gone on forever. Someone in the group came up with the idea of staging a ‘Wembley revival match’ between WISKA UK and WISKA Germany, in order to rewrite history, in a very tongue-in-cheek way of course,” said Ronald Hoppmann.

Creative juices within the global medium-sized enterprise with 260 employees then began to flow. How about holding the match in Hamburg at the HSV stadium, taking our employees to the stadium on the HSV bus and then introducing them to a well-known HSV personality?

The idea gave rise to a project. The ‘WISKA Wembley Revival Cup’ would be held on HSV’s ground, a fun event bringing together employees from both countries through sport. “We met officials from HSV to present our idea and the pieces just fell into place.” The result was that WISKA will be an official supplier to HSV for the 2016/17 season.

The ‘Wembley Revival Cup’, with WISKA facing the English subsidiary, was held on 28 June at the Hamburg Sports Club ground. The afternoon’s surprise guest was HSV legend Uwe Seeler, who gave a first-hand account of that Wembley final.

“We are proud to support HSV, for it’s not just the history, but also the thrill of sporting competition that joins us together,” said Hoppmann with a smile.

PM_WISKA_HSV_Official_Supplier.docx PM_WISKA_HSV_Official_Supplier.pdf PR_WISKA_HSV_Official_Supplier.docx PR_WISKA_HSV_Official_Supplier.pdf Pressebilder-WISKA-HSV-Official-Supplier.zip less

50 years of the Wembley goal: Revival of the legendary football match in Hamburg

29.06.2016

A football game representing the 50th Anniversary of England versus Germany at the World Cup at Wembley in 1966, was played at the HSV Hamburg training facility. The “WISKA Wembley Revival Cup” on the 28th June 2016. 

The teams consisted of Sales employees and Management Staff from both Countries, with members from Scotland and Northern Ireland acting as referees and support staff.WISKA Managing Director Ronald Hoppmann welcomed the participating teams and opened the encounter: “Here at HSV, a football club with one of the richest traditions in Germany, we are pleased to be playing against our colleagues from WISKA UK with friendship and ambition. Both nations and teams are enthusiastic football fans. Despite all this ambition, on this day fun is clearly at the forefront.” Together with his sister, Tanja Hoppmann, he has run the family company founded in 1919 in Hamburg with subsidiaries in China, India, Paraguay, Spain and the United Kingdom into the third generation.

50 years of Wembley. A legendary occasion to which a surprise guest was also invited - the HSV grandee Uwe Seeler. During his career Seeler was thought to be one of the best midfield players in the world and he is now the honorary playmaker of the German national football team. The honorary citizen of his home city of Hamburg was available to the WISKA teams for last minute tips before the match. On the question of which WISKA teams the ex-international was supporting, Seeler explained, “I am neutral today – the focus is on friendship.”

Despite an 8:4 defeat of the German WISKA team against the subsidiary from England the atmosphere remained relaxed. “We’re doing it like professional footballers. On the pitch the enjoyment of sporting competition unites us and off the pitch, friendship,” summarised Hoppmann.

Uwe Seeler presented the cup to the victorious WISKA team from England. Afterwards, both teams took the HSV Fan Bus to a Hamburg beach club, where the eventful day came to a close with a relaxed barbecue.

PM_WISKA_Wembley_Revival_Cup.docx PM_WISKA_Wembley_Revival_Cup.pdf Press-Release_WISKA_Wembley_Revival_Cup.docx Press-Release_WISKA_Wembley_Revival_Cup.pdf Pressebilder-WISKA-Wembley-Revival-Cup.zip less

One System – Three components – Maximum possibilities CONMAXX: The new cable entry system by WISKA for switchboard constructions

11.03.2016

A fast, easy and safe assembly along with maximum flexibility – these features characterize the new cable entry system CONMAXX by WISKA. Thereby underlining its longstanding competence in development of optimized cable entry solutions.

In switchboard constructions the use of modular cable entry systems for standardised industrial connector cutouts is increasing steadily. WISKA is meeting this increasing demand with the development of CONMAXX, its new innovative product line. The closed frame, the grid audibly locking into place and the conically shaped sealing elements make CONMAXX unique and allow for significantly easier and safe assembly at the same time.

The modular 3-component system of CONMAXX allows for a fast implementation of individual installation requirements as well as later adaptions. Furthermore storage capacities are optimised by using the same components for various possibilities.

High versatility for manifold application possibilities

The CONMAXX frame is stable in shape and fits standardised industrial connector cutouts. Due to its closed construction there is no need for unscrewing to insert or change cables – an enormous saving of time in assembly and installation.

The system offers diverse grid inserts for an individual division of the frame size: E. g. for six small sealing elements or for only two small elements and one big element. The audible clicking into place ensures that the components are installed correctly thereby avoiding installation errors.

The product range includes almost 100 different elements for assembled and standard cables, conduits and special cable types (e.g. AS-i cables) with diameters from 2 to 33 mm. This makes CONMAXX highly flexible for every demand offering many application possibilities.

The CONMAXX cable entry system resists demanding environment conditions and extreme temperature ranges. Frame and grid inserts are made of solid and light glass fiber; the sealing inserts of robust TPE. All components are made of halogen and silicon free material that is also resistant against fuel, oils and grease. Grey sealing elements have fire protection class UL 94 V0 and meet the requirements of the railway industry (EN 45545). Furthermore they are acid and alkali resistant. The temperature resistant black sealing elements comply with UL 94 HB, are especially UV-resistant and have a temperature range of -40 °C to 120 °C. All components guarantee the high protection class of IP 65 with mechanical strain relief on the cable.

Simple and yet versatile in handling, time and cost saving, solid and durable – that is how CONMAXX convinces installers in their daily work. The new cable entry system by WISKA mainly comes to use in switchboards and housing installations. CONMAXX is suitable for the demanding requirements of the rail industry, telecommunications, shipbuilding and the energy industry.

Visit us online for technical data and further information on www.wiska.com.

WISKA_Pressemitteilung_CONMAXX.docx WISKA_Pressemitteilung_CONMAXX.pdf WISKA_Press_Release_CONMAXX.docx WISKA_Press_Release_CONMAXX.pdf WISKA_Bilder_CONMAXX.zip less

Plug instead of wiring: The plug-in solution for a quick installation - The new WHK Junction Box for installation plug connectors

11.03.2016

WISKA introduces its new WHK junction box for electrical installations within commercial buildings. The modular unit consisting of the box and various lids can be supplied pre-wired, using installation connectors from all major manufacturers.

With the WHK, WISKA is combining its junction box expertise with the idea of power distribution via installation plug connectors. Pre-fabricated components for building automation, e. g. lighting systems, make it possible to connect the power supply in seconds. By using pre-wired installation connectors, complex wiring inside the junction box is no longer needed. Connection of lights, blinds, sockets and switches to the electricity is time-saving and efficient due to the plug-in options in the lid of the box.

Easy installation and high mounting flexibility

The WHK junction box has eight predispositions for a wide range of connector combinations. Depending on the customer requirements WISKA delivers the junction box with prewired 3, 4 and/or 5 pole installation plug connectors from all regular manufacturers. Alternatively the installer can use the pre-punched knockout options to insert the preferred connectors into the plug-in locations independently. All plug-ins can be easily knocked out manually. Another benefit of the WHK is the high installation and mounting flexibility: A wide range of mounting options is available, for example onto cable trays, threaded rods and mounting plates or using screw anchors, nails or click-installation.

Connector systems – for a safe and flexible installation

Connector systems continue to advance in electrical installations presenting an alternative to traditional installation systems. Installation connectors form the electrical interface between the power supply and distribution, as well as power consumers such as lighting systems. This enables lighting, security (PIR) and building automation applications to be wired through one unit – which makes for a fast and safe pluggable electrical installation. The prewired components make it possible to connect and disconnect the power supply in seconds, and significantly reduce the installation time required. Therefore the WHK is the ideal junction box for all electrical installations within commercial buildings. Whether it is in an office building, supermarket or train station: installation connection systems are used as a plug-in solution wherever flexibility, safety and cost-efficiency are required.

Visit us online for technical data and further information on www.wiska.com/en/whk.

WISKA_Pressemitteilung_WHK.docx WISKA_Pressemitteilung_WHK.pdf WISKA_PressRelease_WHK.docx WISKA_PressRelease_WHK.pdf WISKA_WHK_Bilder.zip less

Small and hot: The new flat cable gland series by WISKA

11.03.2016

WISKA introduces its new cable gland series ShotGLAND. The name says it all – as "shot" stands for "small" and "hot".

The new cable gland by WISKA has been designed especially for the industrial usage where extremely hot or very cold ambient temperatures prevail. Thanks to its minimal installation height, the ShotGLAND is one of the flattest cable glands on the market.

The sealing inserts can be adapted to the individual application: For extreme temperatures the LT version using efficient silicone sealings is ideally suited. It is made for extreme operating temperatures ranging between -60 ° C and 180 ° C, among others, used in the steel industry or the sensor technology. Is the main aim a space-saving installation, the EPDM version is ideal.

The ShotGLAND cable gland is available in thread sizes from M 8 to M 63 thereby covering a broad application spectrum. Both versions standard and LT are offered with an EMC insert. Using different sealing elements large range clamping sizes can be realized.

With the development of the ShotGLAND, WISKA has again proved its long-standing competence for application specific cable glands. ShotGLAND is the ideal addition to the existing cable gland series by WISKA like the breathable Venting products, the Hygienic Design series HatGLAND or the railway series.

Visit us online for technical data and further information on www.wiska.com/en/shotgland.

WISKA_Pressemitteilung_ShotGland.docx WISKA_Pressemitteilung_ShotGland.pdf WISKA_PressRelease_ShotGland.docx WISKA_PressRelease_ShotGland.pdf WISKA_Bilder_ShotGLAND.zip less

High air flow rate with a space-saving design - The new breathable VentPLUG pressure equalization units emphasize WISKA´s Venting competence

11.03.2016

Especially flat and highly breathable – those are the two outstanding features of the new VentPLUG pressure equalization units in the sizes M 20 and M 40 by WISKA. With these new products, the supplier for the craft, industry and shipbuilding underlines his overall competence in the field of condensation prevention.

With an enhanced membrane, WISKA has significantly improved the air flow rate of the new VentPLUG pressure equalization units in M 20 and M 40. In the standard version of the membrane the air flow rate is more than doubled. The high air flow version even achieves an again 2.5 times higher value. The advantages of the used ePTFE membrane e. g. resistance against UV, salt water, oils and grease is retained and make the VentPLUG suitable for roughest conditions including maritime environments.

Another novum is their space-saving design. WISKA has developed two especially flat pressure equalizations units in M 20 and M 40. They are ideally suited for electrical installations with limited space – e. g. in LED lighting modules. Furthermore the new units with their bigger thread sizes are made for the venting of big enclosures as for example in switch board constructions. 

Broad possible application due to wide product range

The VentPLUG in M 20 and M 40 complement the extensive venting product range consisting of cable glands and pressure equalization units and thereby offer an even broader application. Breathable venting products from WISKA ensure effective pressure equalization between the interior and exterior. This reduces stress on the seal and maintains the enclosure´s protection classes. Venting products from WISKA therefore help to increase operational safety and extend the service lives of electrical installations. This has a sustaining positive effect on maintenance costs. VentGLAND ® cable glands and VentPLUG pressure equalization units are being used around the world, especially in sectors that are moisture and temperature sensitive such as shipping, and the lighting and solar industries.

Pioneering Venting competence

Being a pioneer in the development of breathable cable glands, WISKA today is an expert for watertight yet breathable components avoiding condensation.  With the launch of the VentGLAND®  in 2007, the world's first cable  gland with pressure equalization, WISKA set new benchmarks. Thread sizes include M 12 to M 63 with a wide range of materials such as polyamide, brass and stainless steel. Completed by their high protection classes of IP 68 and 69K, venting products by WISKA appear to be true multitalents. On top of that different application specific membranes with differing air flow rates are offered. By its longstanding competence and customer specific consulting WISKA offers individual solutions for every demand.

Visit us online for technical data and further information about our venting products.

WISKA_Pressemitteilung_Venting.docx WISKA_Pressemitteilung_Venting.pdf WISKA_Press_Release_Venting.docx WISKA_Press_Release_Venting.pdf WISKA_Bilder_Venting.zip less

New WISKA highlights for cable entry at Light + Building 2016

09.03.2016

WISKA is going to present four new products at Light + Building in Frankfurt, proving itself an expert in electrical installation. Product novelties include a plug-in junction box, a compression cable gland, high-performance pressure equalization units as well as a unique cable entry system.

The new WISKA WHK junction box offers a fast pluggable installation for internal applications. With diverse knockouts for 3 to 5 pole common installation plug connectors in the lid, it allows for easy external installation instead of complex wiring inside. On request WISKA is supplying the box pre-wired.

The new in-house developed ShotGLAND is likewise versatile. Small and Hot: SHOT - The name of this new cable gland series says it all. Besides its special compact design, it is perfectly suited for applications under extreme temperatures. This is being ensured by silicone sealings while standard applications will be served by EPDM inserts. When it comes to most compact components, ShotGLAND with its minimal installation height is one of the flattest cable glands on the market.

Being a pioneer in the development of breathable cable glands, this year WISKA is also going to extend its Venting range. Besides the VentGLAND® and the VentPLUG pressure equalization units in M12, WISKA now also manufactures polyamide pressure equalization units in M20 and M40. These convince by their new high-performance membranes, which in high airflow quality compared to the standard membrane even achieve a 2.5 times higher air flow rate on the same membrane size. Just like all applied membranes of WISKA, the new types are UV and salt water resistant and therefore ideally suited for roughest environments.

Last but not least, WISKA is going to showcase its CONMAXX cable entry system for the first time in Frankfurt. Following a modular design, by choosing frames, grid units and seals, CONMAXX allows for a maximum of individual cable entry. The closed frame, the grid audibly locking into place and the conically shaped sealing elements make it unique and ensure a significantly easier and safe assembly. The varied choice of sealing inserts ensures a variety of cable diameters, safe seal and strain relief on the cable by their conical design. Later changes to cabling are easily realized by exchanging the seals and grid units; dismantling of the frame is not necessary.

WISKA at Light + Building: Hall 8, Stand E51. http://www.wiska.com/en/home/lightbuilding-2016

WISKA_Pressemitteilung_HMI_2016.pdf WISKA_PressRelease_LB_2016.docx WISKA_PressRelease_LB_2016.pdf WISKA_Pictures-ProductHighlights_LB_2016.zip less

2015

Say goodbye to condensation

10.11.2015

Solutions to solve problems with water condensation in electro-technical installations

WISKA, supplier for the electrical trade, industry and shipbuilding, presents its comprehensive product range of cable glands and junction boxes at SPS IPC Drives from 24 to 26 November 2015 in Nuremberg. One of the particular emphases at Europe's leading trade fair for electric automation technology, is on the venting solutions supplied by WISKA. They prevent condensation in electronic housings and short circuits in sensitive electro-technical installations like LED-luminaires.

Condensation can occur in all areas of electrical installation within tightly-sealed cases that are exposed to changes in temperature, and therefore differences in air pressure between the interior and exterior, despite high IP protection classes. And wherever there is water, there is the risk of corrosion, electrical short-circuits and other damage. These often result in power failures, bottlenecks in supply, and cost-intensive downtime.

Protection against condensation has often been provided in the form of electronic heating ventilation systems, which are expensive and require a high level of maintenance. Or drip-holes in cases, although these also mean the loss of a high protection class. WISKA confronts this challenge with its breathable venting products for pressure equalisation.

The VentGLAND® cable gland and the VentPLUG pressure equalisation unit have a breathable ePTFE membrane, which is watertight and at the same time permeable by air, meaning that it is possible for the pressure between the case interior and exterior to be constantly equalised. That way the formation of condensation is avoided. In addition, the air flow rate can be adapted to customer´s needs, as the pressure equalisation products supplied by WISKA are equipped with different membrane types.

VentGLAND® and VentPLUG both have the high protection class IP 68 and 69K, as well as being UV and salt water-resistant, making them suitable for roughest conditions. The cable glands are available in the following materials: plastic, brass and stainless steel. The locking elements are available in brass and plastic, and stainless steel on request.

The venting products supplied by WISKA are used in engineering and craft applications, for example. Light manufacturers, particularly those who produce LED lights, are also making use of VentGLAND® cable glands with increasing frequency, to protect components in light cases. Customers include the shipping and offshore industries, as well as rail engineering companies, keeping their technical systems ready for operation even in severe environmental conditions.

Alongside its venting products, WISKA is also presenting additional cable glands for various areas of use at SPS IPC Drives 2015 in Hall 5, at Stand 445.

About WISKA

WISKA manufactures electrical equipment, maritime lighting products and CCTV camera surveillance systems for shipbuilding and diverse industries. Founded in Hamburg in 1919, the family company today employs over 230 employees worldwide. The product range includes, for example, searchlights, floodlights, reefer container sockets, cable glands, junction boxes and switches, completed by digital CCTV technology. WISKA operates its own research and development facilities and production plants next-door at its headquarters in Germany and has a global network of representatives and subsidiaries who ensure a quick and effective on-site customer service. www.wiska.com

WISKA-SPS-Pressemitteilung-Nuernberg.docx WISKA-SPS-Pressemitteilung-Nuernberg.pdf WISKA-SPS-PR-Nuernberg.docx WISKA-SPS-PR-Nuernberg.pdf Venting-by-WISKA.jpg less
show more
Your PR contact
Your PR contact

Anja Lange
+49-4191-508-503
pr@wiska.de

News
Company Profile

Company Profile
 

Company Profile

forgot password?

Downloads | Contact | Imprint | T&C | Privacy Policy | Sitemap | Press Releases | login | Print page
Stand: 14.12.2018 12:12:00